View SKY73089-11_7742521.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 201180c ? skyworks proprietary and confiden tial information ? produc ts and product information ar e subject to change witho ut notice ? june 30, 2010 1 data sheet SKY73089-11: 1200 C 1700 mhz high gain and linearity diversity downconversion mixer applications ? 2g/3g base station transceivers: ? gsm/edge, cdma, umts/wcdma ? land mobile radio ? high performance radio links features ? operating frequency range: 1200 to 1700 mhz ? if frequency range: 50 to 500 mhz ? conversion gain: 9.3 db ? input ip3: +26.8 dbm ? output ip3: +36.1 dbm ? noise figure: 9.3 db ? integrated lo drivers ? integrated low loss rf baluns ? high linearity if amplifiers ? on-chip spdt lo switch (greater than 40 db lo-to-lo isolation) ? small, mcm (36-pin, 6 x 6 mm) package (msl3, 260 ? c per jedec j-std-020) description the SKY73089-11 is a fully integrated diversity mixer that includes local oscillator (lo) drivers, an lo switch, high linearity mixers, and large dynamic range intermediate frequency (if) amplifiers. low loss rf baluns have also been included to reduce design complications and lower system cost. the SKY73089-11 features an input ip3 of +26.8 dbm and a noise figure (nf) of 9.3 db, making the device an ideal solution for high dynamic range systems such as 2g/3g base station receivers. the lo switch provides more than 40 db of isolation between lo inputs and supports the switching time required for gsm/edge base stations. the SKY73089-11 is manufactured using a robust silicon bicmos process and has been designed for optimum long-term reliability. the SKY73089-11 diversity downconversion mixer is provided in a compact, 36-pin multi-chip module (mcm). a functional block diagram is shown in figure 1. the pin configuration and package are shown in figure 2. signal pin assignments and functional pin descriptions are provided in table 1. s643 rfa rfb ifb+ ifbC lo1 lo2 lo_sel (switch enable) ifa+ ifaC figure 1. SKY73089-11 block diagram
data sheet ? SKY73089-11 downconversion mixer skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 2 june 30, 2010 ? skyworks prop rietary and confidential information ? produc ts and product informatio n are subject to chang e without notice ? 201180c s 6 4 6 a 27 2 6 25 24 23 22 21 20 1 9 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1 6 17 18 3 6 35 34 33 32 31 30 2 9 28 n/ c rfa v cc 1 g nd v cc 2 g nd n/ c rfb v cc 3 n/ c g nd ifb+ ifbC n/ c v cc 4 rifb n/ c v cc 7 n/ c g nd ifaC ifa+ n/ c v cc6 rifa n/ c g nd g nd lo2 g nd g nd g nd lo_ s el g nd lo1 v cc 5 figure 2. SKY73089-11 pinout C 36-pin mcm (top view) table 1. SKY73089-11 signal descriptions pin # n a me description pin # n a me description 1 rfa rf channel a input 19 lo1 local oscillator #1 input 2 nc no connect 20 gnd ground 3 gnd ground 21 vcc5 dc supply, +5 v 4 vcc1 dc supply, +5 v 22 gnd ground 5 gnd ground 23 lo_sel local oscillator switch select 6 vcc2 dc supply, +5 v 24 gnd ground 7 gnd ground 25 gnd ground 8 nc no connect 26 gnd ground 9 rfb rf channel b input 27 lo2 local oscillator #2 input 10 vcc3 dc supply, +5 v 28 nc no connect 11 nc no connect 29 rifa if channel a bias control 12 gnd ground 30 vcc6 dc supply, +5 v 13 ifb+ if channel b positiv e output 31 nc no connect 14 ifbC if channel b negative output 32 ifa+ if channel a positive output 15 nc no connect 33 ifaC if channel a negative output 16 vcc4 dc supply, +5 v 34 gnd ground 17 rifb if channel b bias control 35 nc no connect 18 nc no connect 36 vcc7 dc supply, +5 v
data sheet ? SKY73089-11 downconversion mixer skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 201180c ? skyworks proprietary and confiden tial information ? produc ts and product information ar e subject to change witho ut notice ? june 30, 2010 3 functional description the SKY73089-11 is a high gain diversity mixer, optimized for base station receiver applications. the device consists of two diversity channels, each consisting of a low loss rf balun, high linearity passive mixer, and a low noise if amplifier. lo amplifiers are also included that allow the SKY73089-11 to connect directly to the output of a voltage controlled oscillator (vco). this eliminates the extra gain stages needed by most discrete passive mixers. a single pole, double throw (spdt) switch has been included to select between two different lo inputs for frequency hopping applications (i.e., gsm). rf baluns and passive mixer the rf baluns provide a single ended input, which can easily be matched to 50 ? using a simple matching circuit. the rf baluns offer very low loss and excellent amplitude and phase balance. the high linearity mixer is a passive, double balanced mixer that provides a very low insertion loss, and excellent 3 rd order input insertion point (iip3) and linearity performance. additionally, the balanced nature of the mixer provides for excellent port-to-port isolation. lo buffers and spdt lo switch the lo buffers allow the input power of the SKY73089-11 to be programmed in the range of C6 to +6 dbm. the lo section has been optimized for high-side lo injection. however, the lo can be driven over a wide frequency range with only slight degradation in performance. a high isolation spdt switch allows the SKY73089-11 to be used for frequency hopping applications. this switch provides greater than 60 db of lo1 to lo2 isolation: lo_sel logic: st a te: high lo1 enabled low lo2 enabled for applications that do not require frequency hopping, lo_sel is fixed to one state and the appropriate lo input is used. if amplifier the SKY73089-11 includes high dynamic range if amplifiers that follow the passive mixers in the signal path. the outputs require a supply voltage connection using inductive chokes. these choke inductors should be high-q and have the ability to handle 200 ma or greater. a simple matching network allows the output ports to be matched to a balanced 200 ? impedance. the if amplifiers are optimized for if frequencies between 50 and 500 mhz. the if amplifiers can be operated outside of this range, but with a slight degradation in performance. electrical and mechanical specifications the absolute maximum ratings of the SKY73089-11 are provided in table 2. the recommended operating conditions are specified in table 3 and electrical specifications are provided in table 4. spurious suppression measurements are provided in table 5. typical performance characteristics of the SKY73089-11 are illustrated in figures 3 through 29.
data sheet ? SKY73089-11 downconversion mixer skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 4 june 30, 2010 ? skyworks prop rietary and confidential information ? produc ts and product informatio n are subject to chang e without notice ? 201180c table 2. SKY73089-11 absolute maximum ratings p a r a meter symbol minimum typic a l m a ximum units supply voltage, +5 v (vcc1 C vcc7) vcc 4.5 5.0 5.5 v supply current i cc 370 430 ma rf input power p rf +20 dbm lo input power p lo 0 +20 dbm operating case temperature t c C40 +85 ? c junction temperature t j +150 ? c storage case temperature t stg C40 +125 ? c notes: exposure to maximum rating conditions for extended periods may reduce device reliability. there is no damage to device with on ly one parameter set at the limit and all other parameters set at or below their nominal value. exceeding any of the limits listed here may result in permanent damage to the d evice. nominal thermal resistance (junction to center ground pad) is 5.1 ? c/w. caution : although this device is designed to be as robust as possible, electrostatic discharge (esd) can damage this device. this devi ce must be protected at all times from esd. static charges may eas ily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. industry-standard esd precautions should be used at all times. table 3. SKY73089-11 recommended operating conditions p a r a meter symbol minimum typic a l m a ximum units rf frequency range f rf 1200 1700 mhz lo frequency range (note 1) f lo 1250 2150 mhz if frequency range f if 50 450 mhz supply voltage, +5 v (vcc1 C vcc7) vcc 4.75 5.00 5.25 v supply current i cc 370 ma lo input power p lo C6 0 +6 dbm lo select logic: high low lo_sel h lo_sel l 2.2 0.8 v v operating case temperature t c C40 +85 ? c note 1 : the SKY73089-11 has been optimized for high-side lo injection. howe ver, the lo can be used outside of the specified frequency range with degraded performance.
data sheet ? SKY73089-11 downconversion mixer skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 201180c ? skyworks proprietary and confiden tial information ? produc ts and product information ar e subject to change witho ut notice ? june 30, 2010 5 table 4. SKY73089-11 electrical specifications (note 1) (voltage supply = +5 v, t c = +25 ? c, lo = 0 dbm, rf frequency = 1445 mhz, if frequency = 350 mhz, lo frequency = 1795 mhz, unless otherwise noted) p a r a meter symbol test condition min typic a l m a x units conversion gain g 8.6 9.3 db conversion gain variation over temperat ure g C40 c to +85 c 0.6 db noise figure nf 9.3 11.0 db noise figure variation over temperature nf C40 c to +85 c 0.8 db noise figure with a blocker signal nf blk blocking signal input power = +8 dbm 25 db third order input intercept point iip3 f rf = 1445 and 1445.8 mhz, p rf = C10 dbm/each tone +24.0 +26.8 dbm third order input intercept point variation over temperature iip3 C40 c to +85 c 0.5 db third order output intercept point oip3 f rf = 1445 and 1445.8 mhz, p rf = C10 dbm/each tone +36.1 dbm 2lo C 2rf 2x2 p rf = C10 dbm C71 C60 dbc 3lo C 3rf 3x3 p rf = C10 dbm C83 C70 dbc input 1 db compression point ip1db +11.7 +13.9 dbm input 1 db compression point variation over temperature ip1db C40 c to +85 c 0.6 db output 1 db compression point op1db +22.2 dbm lo1 to lo2 isolation 40 49 db channel-to-channel isolation 46 54 db rf to if isolation 60 67 db lo leakage: 1xlo to rf port 2xlo to rf port 3xlo to rf port 4xlo to rf port 1xlo to if port C28 C22 C52 C68 C62 C25 C20 C32 C50 C30 dbm dbm dbm dbm dbm lo_sel input C20 +150 +250 ? a lo switching time 1.0 ? s rf port input return loss z in _ rf with external matching components 14 db lo port input return loss z in _ lo with external matching components 14 db if port input return loss z out _ if with external matching components 14 db note 1 : performance is guaranteed only under the conditions listed in this table.
data sheet ? SKY73089-11 downconversion mixer skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 6 june 30, 2010 ? skyworks prop rietary and confidential information ? produc ts and product informatio n are subject to chang e without notice ? 201180c table 5. SKY73089-11 spur suppression measur ements, 3gpp bands #11 and 21 (note 1) p a r a meter symbol test condition min typic a l m a x units 4rf-3lo 4x3 p rf = 0 dbm, f rf = 1440 mhz, if spur frequency = 375 mhz C98 C85 dbc 6rf-5lo 6x5 p rf = 0 dbm, f rf = 1445 mhz, if spur frequency = 305 mhz C112 C85 dbc 7rf-6lo 7x6 p rf = 0 dbm, f rf = 1480 mhz, if spur frequency = 410 mhz C122 C85 dbc 9rf-7lo 9x7 p rf = 0 dbm, f rf = 1430 mhz, if spur frequency = 305 mhz C119 C85 dbc 10rf-8lo 10x8 p rf = 0 dbm, f rf = 1400 mhz, if spur frequency = 360 mhz p rf = 0 dbm, f rf = 1465 mhz, if spur frequency = 290 mhz C114 C120 C85 C85 dbc note 1: performance is guaranteed only under the conditions listed in this table.
data sheet ? SKY73089-11 downconversion mixer skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 201180c ? skyworks proprietary and confiden tial information ? produc ts and product information ar e subject to change witho ut notice ? june 30, 2010 7 typical performance characteristics (voltage supply = +5 v, t c = +25 ? c, lo = 0 dbm, rf frequency = 350 mhz, if frequency = 90 mhz, lo frequency = 440 mhz, unless otherwise noted) 10.0 10.5 9 .0 9 .5 8.0 8.5 7.0 7.5 6 .0 6 .5 11.0 1427144514 6 3 frequency (mhz) c onver s ion g ain (db) 4.75 v 5.00 v 5.25 v figure 3. channel a gain over frequency and supply voltage 10.0 10.5 9 .0 9 .5 8.0 8.5 7.0 7.5 6 .0 6 .5 11.0 1427 1445 14 6 3 frequency (mhz) c onver s ion g ain (db) C40 c +25 c +85 c figure 5. channel a gain over frequency and temperature 10.0 10.5 9 .0 9 .5 8.0 8.5 7.0 7.5 6 .0 6 .5 11.0 1427 1445 14 6 3 frequency (mhz) c onver s ion g ain (db) C3 dbm 0 dbm +3 dbm figure 7. channel a gain over frequency and lo power 10.0 10.5 9 .0 9 .5 8.0 8.5 7.0 7.5 6 .0 6 .5 11.0 1427 1445 14 6 3 frequency (mhz) c onver s ion g ain (db) 4.75 v 5.00 v 5.25 v figure 4. channel b gain over frequency and supply voltage 10.0 10.5 9 .0 9 .5 8.0 8.5 7.0 7.5 6 .0 6 .5 11.0 1427 1445 14 6 3 frequency (mhz) c onver s ion g ain (db) C40 c +25 c +85 c figure 6. channel b gain over frequency and temperature 10.0 10.5 9 .0 9 .5 8.0 8.5 7.0 7.5 6 .0 6 .5 11.0 1427 1445 14 6 3 frequency (mhz) c onver s ion g ain (db) C3 dbm 0 dbm +3 dbm figure 8. channel b gain over frequency and lo power
data sheet ? SKY73089-11 downconversion mixer skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 8 june 30, 2010 ? skyworks prop rietary and confidential information ? produc ts and product informatio n are subject to chang e without notice ? 201180c +28 +2 9 +2 6 +27 +24 +25 +22 +23 +20 +21 +30 1427 1445 14 6 3 frequency (mhz) iip3 (dbm) 4.75 v 5.00 v 5.25 v figure 9. channel a iip3 over frequency and supply voltage +28 +2 9 +2 6 +27 +24 +25 +22 +23 +20 +21 +30 1427 1445 14 6 3 frequency (mhz) iip3 (dbm) C40 c +25 c +85 c figure 11. channel a iip3 over frequency and temperature +28 +2 9 +2 6 +27 +24 +25 +22 +23 +20 +21 +30 1427 1445 14 6 3 frequency (mhz) iip3 (dbm) C3 dbm 0 dbm +3 dbm figure 13. channel a iip3 over frequency and lo power +28 +2 9 +2 6 +27 +24 +25 +22 +23 +20 +21 +30 1427 1445 14 6 3 frequency (mhz) iip3 (dbm) 4.75 v 5.00 v 5.25 v figure 10. channel b iip3 over frequency and supply voltage +28 +2 9 +2 6 +27 +24 +25 +22 +23 +20 +21 +30 1427 1445 14 6 3 frequency (mhz) iip3 (dbm) C40 c +25 c +85 c figure 12. channel b iip3 over frequency and temperature +28 +2 9 +2 6 +27 +24 +25 +22 +23 +20 +21 +30 1427 1445 14 6 3 frequency (mhz) iip3 (dbm) C3 dbm 0 dbm +3 dbm figure 14. channel b iip3 over frequency and lo power
data sheet ? SKY73089-11 downconversion mixer skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 201180c ? skyworks proprietary and confiden tial information ? produc ts and product information ar e subject to change witho ut notice ? june 30, 2010 9 11.0 11.5 10.0 10.5 9 .0 9 .5 8.0 8.5 7.0 7.5 12.0 1427 1445 14 6 3 frequency (mhz) noi s e figure (db) C40 c +25 c +85 c figure 15. channel a noise figure over frequency and temperature +14.0 +14.5 +13.0 +13.5 +12.0 +12.5 +11.0 +11.5 +10.0 +10.5 +15.0 1427 1445 14 6 3 frequency (mhz) ip1db (dbm) C40 c +25 c +85 c figure 17. channel a ip1db over frequency and temperature C 6 4 C 6 2 C 6 8 C 66 C72 C70 C7 6 C74 C80 C78 C 6 0 1427 1445 14 6 3 frequency (mhz) 2x2 (dbc) C40 c +25 c +85 c figure 19. channel a 2x2 over frequency and temperature 11.0 11.5 10.0 10.5 9 .0 9 .5 8.0 8.5 7.0 7.5 12.0 1427 1445 14 6 3 frequency (mhz) noi s e figure (db) C40 c +25 c +85 c figure 16. channel b noise figure over frequency and temperature +14.0 +14.5 +13.0 +13.5 +12.0 +12.5 +11.0 +11.5 +10.0 +10.5 +15.0 1427 1445 14 6 3 frequency (mhz) ip1db (dbm) C40 c +25 c +85 c figure 18. channel b ip1db over frequency and temperature C 6 4 C 6 2 C 6 8 C 66 C72 C70 C7 6 C74 C80 C78 C 6 0 1427 1445 14 6 3 frequency (mhz) 2x2 (dbc) C40 c +25 c +85 c figure 20. channel b 2x2 over frequency and temperature
data sheet ? SKY73089-11 downconversion mixer skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 10 june 30, 2010 ? skyworks proprietary a nd confidential information ? products and product information are subject to chan ge without notice ? 201180c C74 C72 C78 C7 6 C82 C80 C8 6 C84 C 9 0 C88 C70 1427 1445 14 6 3 frequency (mhz) 3x3 (dbc) C40 c +25 c +85 c figure 21. channel a 3x3 over frequency and temperature 5 6 58 52 54 48 50 44 4 6 40 42 6 0 1427 1445 14 6 3 frequency (mhz) c hannel-to- c hannel i s olation (db) C40 c +25 c +85 c figure 23. channel-to-channel isolation over frequency and temperature 1427 1445 14 6 3 frequency (mhz) C54 C52 C58 C5 6 C 6 2 C 6 0 C 66 C 6 4 C70 C 6 8 C50 lo-to-if leakage (dbm) C40 c +25 c +85 c figure 25. channel b lo to if leakage over frequency and temperature C74 C72 C78 C7 6 C82 C80 C8 6 C84 C 9 0 C88 C70 1427 1445 14 6 3 frequency (mhz) 3x3 (dbc) C40 c +25 c +85 c figure 22. channel b 3x3 over frequency and temperature 1427 1445 14 6 3 frequency (mhz) C54 C52 C58 C5 6 C 6 2 C 6 0 C 66 C 6 4 C70 C 6 8 C50 lo-to-if leakage (dbm) C40 c +25 c +85 c figure 24. channel a lo to if leakage over frequency and temperature 1427 1445 14 6 3 frequency (mhz) C24 C22 C28 C2 6 C32 C30 C3 6 C34 C40 C38 C20 lo-to-rf leakage (dbm) C40 c +25 c +85 c figure 26. channel a lo to rf leakage over frequency and temperature
data sheet ? SKY73089-11 downconversion mixer skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 201180c ? skyworks proprietary and confiden tial information ? produc ts and product information ar e subject to change witho ut notice ? june 30, 2010 11 1427 1445 14 6 3 frequency (mhz) C24 C22 C28 C2 6 C32 C30 C3 6 C34 C40 C38 C20 lo-to-rf leakage (dbm) C40 c +25 c +85 c figure 27. channel b lo to rf leakage over frequency and temperature 1427 1445 14 6 3 frequency (mhz) 7 6 78 72 74 6 8 70 6 4 66 6 0 6 2 80 rf-to-if i s olation (db) C40 c +25 c +85 c figure 29. channel b rf to if isolation over frequency and temperature 1427 1445 14 6 3 frequency (mhz) 7 6 78 72 74 6 8 70 6 4 66 6 0 6 2 80 rf-to-if i s olation (db) C40 c +25 c +85 c figure 28. channel a rf to if isolation over frequency and temperature evaluation board description the SKY73089-11 evaluation board is used to test the performance of the SKY73089-11 downconversion mixer. an assembly drawing for the evaluation board is shown in figure 30 and the layer detail is provided in figure 31. a schematic diagram of the SKY73089-11 evaluation board is shown in figure 32. circuit design configurations the following design considerations are general in nature and must be followed regardless of final use or configuration: 1. paths to ground should be made as short as possible. 2. the ground pad of the SKY73089-11 has special electrical and thermal grounding requirements. this pad is the main thermal conduit for heat dissipation. since the circuit board acts as the heat sink, it must shunt as much heat as possible from the device. therefore, design the connection to the ground pad to dissipate the maximum wattage produced by the circuit board. 3. skyworks recommends including external bypass capacitors on the vcc voltage inputs of the device. 4. components l5, l6, l14, and l15 (see figure 32) are high-q low loss inductors. these inductors must be able to pass currents in excess of 200 ma dc. 5. components r1 and r2 (see figure 32) set the bias current for the if amplifiers. skyworks recommends that these resistors have a tolerance of ? 1% to optimize performance consistency of the SKY73089-11. these resistors are not required for the evaluation board to operate as specified in tables 3 and 4. package dimensions the pcb layout footprint for the SKY73089-11 is provided in figure 33. figure 34 shows the package dimensions for the 36-pin mcm and figure 35 provides the tape and reel dimensions.
data sheet ? SKY73089-11 downconversion mixer skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 12 june 30, 2010 ? skyworks proprietary a nd confidential information ? products and product information are subject to chan ge without notice ? 201180c package and handling information since the device package is sensitive to moisture absorption, it is baked and vacuum packed before shipping. instructions on the shipping container label regarding exposure to moisture after the container seal is broken must be followed. otherwise, problems related to moisture absorption may occur when the part is subjected to high temperature during solder assembly. the SKY73089-11 is rated to moisture sensitivity level 3 (msl3) at 260 ? c. it can be used for lead or lead-free soldering. for additional information, refer to the skyworks application note, pcb design & smt assembly/rework guidelines for mcm-l packages , document number 101752. care must be taken when attaching this product, whether it is done manually or in a production solder reflow environment. production quantities of this product are shipped in a standard tape and reel format. s90 5 j4 j1 j7 j6 j10 j3 j8 j5 j9 l16 l17 r4 r5 r2 l13 l11 l15 l12 c34 c35 c32 l14 c38 c33 c39 c24 c25 c27 c23 c21 c22 c17 l10 c18 c19 c40 r1 r6 c13 c14 c11 r3 t1 l8 l9 c16 c15 c37 c36 l18 l19 c12 c41 c5 c4 c1 c3 l2 c2 l1 c8 c7 l4 c6 l3 l6 l5 c20 c26 c29 c28 t2 j2 figure 30. SKY73089-11 evaluation board assembly diagram
data sheet ? SKY73089-11 downconversion mixer skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 201180c ? skyworks proprietary and confiden tial information ? produc ts and product information ar e subject to change witho ut notice ? june 30, 2010 13 s904 layer 1: top -- metal layer 2: ground layer 3: power plane layer 4: solid ground plane figure 31. SKY73089-11 evaluation board layer detail
data sheet ? SKY73089-11 downconversion mixer skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 14 june 30, 2010 ? skyworks proprietary a nd confidential information ? products and product information are subject to chan ge without notice ? 201180c rfb v cc 3 n c g nd ifb+ ifbC n c v cc 4 rifb v cc 7 n c g nd ifa+ ifaC n c v cc6 rifa n c v cc 1 n c g nd v cc 2 g nd g nd n c rfa lo1 g nd g nd v cc 5 g nd lo_ s el g nd g nd lo2 j4 sky730 89 c 1 0 1 2 3 4 5 6 7 8 9 27 2 6 25 24 23 22 21 20 1 9 10 11 12 13 14 15 1 6 17 18 3 6 35 34 33 32 31 30 2 9 28 l2 12 nh l1 0 j7 c 8 0 v cc v cc l5 470 nh l8 10 nh l 6 470 nh l3 0 l 9 0 c 15 15 pf c 35 33 pf c 3 0.2 pf c 7 0.2 pf c 17 33 pf c 21 33 pf c 22 12 pf j 6 t1 db714 v cc v cc x x x n c x x x x x l10 0 j3 v cc v cc v cc v cc c 23 33 pf l11 0 j8 r1 dni r3 0 c 13 1 f element jumper c 20 1 f c 14 33 pf c 2 6 1 f c 27 33 pf c 2 9 15 pf l4 12 nh t2 db714 v cc j5 l13 10 nh l14 470 nh l15 470 nh l12 0 r2 dni r4 0 s1772 note: the sky73089 evaluation board can be converted to provide a differential output by removing components t1, t2, r3, and r4. some component labels may be different than the corresponding component symbol shown here. component values, however, are accurate as of the date of this data sheet. figure 32. SKY73089-11 evaluation board schematic
data sheet ? SKY73089-11 downconversion mixer skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 201180c ? skyworks proprietary and confiden tial information ? produc ts and product information ar e subject to change witho ut notice ? june 30, 2010 15 s1125 stencil aperture top view metallization top view solder mask opening top view 6.3 0.15 0.075 0.75 0.9 0.25 0.4 0.075 6.3 12x 0.062 24x 0.125 12x 0.063 24x 0.125 36x 0.875 36x 0.875 0.5 pitch typ stencil aperture size for center ground pads should be 80% to 100% (by area) of the solder mask opening of the package. component outline component outlin e smt pad detail scale: 2x 9x this rotation 9x rotated 180 o 9x rotated 90 o cw 9x rotated 90 o ccw stencil and metallization soldermask opening all measurements are in millimeters 2x 2.775 thermal via array. ? 0.3 mm on 0.6 mm pitch. additional vias in common ground pad will improve thermal and electrical performance. note: thermal vias should be tented and filled with solder mask, 30-35 m cu plating recommended. note: the cross-hatched area represents the merger of the center ground pad +10 individual i/o ground pads. all i/o ground pads should have at least one via connected to internal ground planes for optimum electrical performance. pin 1 pin 36 component outline component outline 6.45 6.3 2x 2.775 0.25 typ 6.45 6.3 3.88 figure 33. pcb layout footprint for the SKY73089-11 6 x 6 mm mcm
data sheet ? SKY73089-11 downconversion mixer skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 16 june 30, 2010 ? skyworks proprietary a nd confidential information ? products and product information are subject to chan ge without notice ? 201180c all measurements are in millimeters pads are solder mask defined on one edge and metal defined on three edges. dimensioning and tolerancing according to asme y14.5m-1994 s689_a 6 6 pin 1 indicator metal pad edge 1.1 0.1 0.4 0.05 0.5 0.1 (0.1) side view b bottom view a detail a detail d top view pin 36 pin 1 pin 1 indicator (see detail d) 0.25 0.05 18x 2.9 0.2 x 0.2 solder mask opening 36x smt pad 0.15 a b c 0.2 a b c 0.15 a b c c a 0.1 4x 2 4x 2 2x 1.9 2x 1.9 18x 2.9 3x r0.2 4x 1.5 4x 1.5 4x 1 4x 1 4x 0.5 4x 0.5 figure 34. SKY73089-11 36-pin mcm package dimensions
data sheet ? SKY73089-11 downconversion mixer skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 201180c ? skyworks proprietary and confiden tial information ? produc ts and product information ar e subject to change witho ut notice ? june 30, 2010 17 s1183 notes: 1. carrier tape: black conductive polystyrene 2. cover tape material: transparent conductive psa 3. cover tape size: 9.3 mm width 4. all dimensions are in millimeters 5. pin 1 orientation is in top left corner for the following skyworks products: sky73022-21, -31 sky73023-21, -31 for all other 6 x 6 mm mcm/rflga products, pin 1 orientation is in top right corner. a b 2.00 0.05 ? 1.50 0.10 0.30 0.02 7 o max. 8 o max. 6.35 1.75 0.10 ? 1.50 min. 5.50 0.05 8.00 4.00 a b b a 1.59 12.00 0.30 6.35 pin #1 indicator (see notes) figure 35. SKY73089-11 tape and reel dimensions
data sheet ? SKY73089-11 downconversion mixer skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 18 june 30, 2010 ? skyworks proprietary a nd confidential information ? products and product information are subject to chan ge without notice ? 201180c ordering information model n a me m a nuf a cturing p a rt number ev a lu a tion bo a rd p a rt number SKY73089-11 1200-1700 mhz downconver sion mixer SKY73089-11 tw17-d880 copyright ? 2009, 2010 skyworks solutions, inc. all rights reserved. information in this document is provided in connection with skyw orks solutions, inc. (skyworks) products or services. these m aterials, including the information co ntained herein, are provided by skyworks as a service to its customers and may be used for info rmational purposes only by the cu stomer. skyworks assumes no res ponsibility for errors or omissions in these materials or the information contained herein. skyworks may change its documentat ion, products, services, specific ations or product descriptions at any time, without notice. sk yworks makes no commitment to update the materials or information and shall have no responsi bility whatsoever for conflicts, incompatibilities, or other diff iculties arising from any future changes. no license, whether express, implied, by es toppel or otherwise, is granted to any in tellectual property rights by this document . skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, re production or use of skyworks products, information or mate rials, except as may be provided in skyworks terms and conditions of sale. the materials, products and information are pr ovided as is without warranty of any ki nd, whether express, implied, statutory, or otherwise, including fitness for a particular purpose or use, merchantability, performance, qualit y or non-infringement of any intellectual property right; all su ch warranties are hereby expressly disclaimed. skyworks does not warrant the accura cy or completeness of the information, text, graphics or other items contained within these ma terials. skyworks shall not be liable for any damages, including but not limited to any special, indirect, incidental, statutory, or consequentia l damages, including without limitation, lost revenues or lost profits that may result from the use of the materials or information, wheth er or not the recipient of mat erials has been advised of the possibility of such damage. skyworks products are no t intended for use in medical, lifesaving or life-su staining applications, or other equipment in which the failure of the skyworks products could lead to personal injury, death, physical or environmental damage. skyw orks customers using or selli ng skyworks products for use in such applications do so at their own risk and agree to fully indemnify skyworks for any damages resulting from such improper use or sale. customers are responsible for their products and applications us ing skyworks products , which may deviate from published specifi cations as a result of design de fects, errors, or operation of products outside of published pa rameters or design specifications. customers sh ould include design and operating safeguards to minimize these and other risks. skyworks assumes no liability for applications assistance, customer product de sign, or damage to any equipment resulting from the use of skyw orks products outsid e of stated published specifications or parameters. skyworks, the skyworks symbol, a nd breakthrough simplicity are trademarks or registered tradem arks of skyworks solutions, inc ., in the united states and othe r countries. third-party brands and names are for identification purposes only, and are the proper ty of their respective owners. additional information, includ ing relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference.

▲Up To Search▲

Price & Availability of SKY73089-11

	To Download SKY73089-11 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .